Wood rosette and plinth blocks with bullseye patterns

Harttwood Logo.jpg (9606 bytes)

Rosette Corner Block
Architectural Moulding
Plinth Block

Rosette And Plinth Block patterns #1a through #12

Below and on our other two pages are the rosette and plinth block patterns ( 34 total) Harttwood offers at present time. These were milled on pine, the preferred wood for painting, also takes stain very well. For other wood species see our prices page. The pattern ID numbers and the diameters of the profile cut are on each of the appropriate blocks shown below.

You may choose any pattern for the size and species of block you need. Keep in mind that these given sizes ( diameters) are the actual size of the pattern cut, and a diameter of 3 1/4" cut will not fit on a block 2 3/4" square. We recommend at least 1/4" from the edge of the pattern cut to the edge of the block (i.e. a diameter of profile cut of 3 1/4" and a block size of 3 3/4" or 4"square or larger).

Click on any pattern for a larger size view.